BAKERLOK Thread Locking Compound

Bakerlok® is a superior thread locking compound, commonly used for casing, tubing and drilling joints to prevent accidental detaching of string components during drilling operations.

Specifications:

- Casing O.D. 4-1/2” (in): 10 joints each Bakerlok® kit will lock

- Casing O.D. 5-1/2” (in): 6 joints each Bakerlok® kit will lock

- Casing O.D. 6-1/2” or 7” (in): 4 joints each Bakerlok® kit will lock

- Casing O.D. 7-5/8”, 8-5/8”, or 9-5/8” (in): 3 joints per each Bakerlok® kit

- Casing O.D. 10-3/4”, 11-5/8”, or 13-5/8” (in): 2 joints per each Bakerlok® kit

- Casing O.D. 16” or 20” (in): 1 joint per each Bakerlok®

- One (1) Bakerlok® case contains ten (10) kits 

One (1) Bakerlok® kit contains:

- One (1) 8 oz per can of Bakerlok® thread-locking compound

- One (1) Hardener vial

- One (1) Applicator.

Features: - Withstands high breakout torque: (field trials in temperatures ranging from 50 C (122F) through 400 Celsius (752F) at the bottom of the borehole, showed Bakerlok® withstands superior torque loads, than a typical joint with 3-point welding with 2 inch beads. - Easy Mixing: Bakerlok® thread locking compound is specially formulated to ensure a stable mixing consistency in most operational environments. - Long "Potlife" after mixing: Special formulation (catalyst and compound) in Bakerlok® insures a "potlife" in excess of one hour; even at high. - Unchanged by vibration: At 400 C (752F) Bakerlok® treated joint was subjected to a steady breakout torque for 8 hours, white being subjected to continuous Air Hammer vibration. Breakout torque was increased to reach six times the prescribed 3,300ft-lb makeup torque, before the joint finally broke. - High Lubricity: Tests were conducted using Bakerlok® side by side with API modified thread dope. With the same amount of torque, the Bakerlok® treated joint was cooler, than the joint treated with standard thread dope - Leak-proof seal: Couplings made up with Bakerlok® thread locking compound, using standard toque, were tested with water pressures in excess of the listed bursting force of the casing, without any signs of leakage.